Lots of folks are interested in HVAC issues, but they don’t know where to begin learning about them. Of course, every little bit of information will improve your understanding. In this article we will share some good tips and helpful information.
Your outside condenser fan can be helped to run better by you cleaning the fan blades and coils prior to summer starting up. The power to the unit should be removed before you begin any maintenance, even cleaning. Also, make sure you remove any debris or leaves from the condenser unit outside.
If you have units that are condensers outside of the home, keep them free of debris. You can never tell when things will pile up, especially following rain or wind storms. These can wreak havoc on your units. Also, you are risking your system overheating.
Don’t get grass clippings on your outside unit. Aim the grass clippings in the other direction. The same thing should go on when you blow leaves, so take your time when you’re working around HVAC units that are around when you’re blowing debris around.
Try to prevent debris from getting in your HVAC unit. When you notice your trees shedding, frequently clean your unit’s fan grill. You can head off future problems that can be caused by blockages by making sure there is a free flow of air to your fan.
Many homeowners forget to oil their condenser at least once per year, but it is required. You can easily find the ports as they have a rubber or metal cap. Pick a type of SAE 20 oil that is non-detergent and lightweight. Place 10 or less drops into every port to avoid overfilling.
It’s not hard to work with an HVAC if you can work with it and use the advice above. Of course, this will be a more hand-on learning experience once you start working with the HVAC system. Start as soon as you can for the best results.
Please visit my home page at: RaleighAirDuctCleaning.com
Tagged with: grass clippings
Filed under: HVAC
Like this post? Subscribe to my RSS feed and get loads more!