Many people today want their homes to have HVAC units. They help to ensure the entire home maintains a pleasing temperature. You will generally need a contractor to install and maintain your unit. Continue reading for some helpful tips to use when it comes to HVAC.

What system do you have? You need this information to tell your contractor. Know what the manufacturer’s name is, which particular model you have and what’s gone on with the unit in the past. This helps make sure the contractor has the information they will need.

Cleaning the blades and coils will help the system run better. Turn off your power before doing any job like this. Clean the outside of your condenser unit regularly.

TIP! What do you need done? Know this before calling a contractor. It will be hard for a contractor to give you a price estimate over the phone if they have not seen your current system.

Clean the fan blades and coils on the condenser fan every spring. First, turn off the power so that nothing will move as you are working on it. Next, pop the grill off, put the blades out and start to gently clean them along with the unit.

Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Turn your lawnmower in the opposite direction. If you’re blowing leaves, this same problem can occur, so make sure you move around the unit and blow the leaves away from it.

If you need to decide the best place to put your outdoor compressor unit, consider putting it in a location that is in the shade. When your unit takes in cool air, it takes less energy to tool the air, thus boosting efficiency.

TIP! To make sure your condenser fan works properly, keep the fan blades and the coils clean. Make sure your power is off before doing more than cleaning, such as working on the unit.

Be sure to place your outdoor unit in a shady spot to maximize efficiency. The air in the shade is cooler and can help save on energy costs.

As the temperature outside drops, remember to turn off your outdoor condenser unit. When the temperature drops beneath 60 degrees, it’s time to cut off the unit to prevent damage. This will ensure your system stays in good working order every year, saving you money on costly repairs.

Pane Windows

TIP! If the outside of your home has condenser units, ensure they are constantly cleaned. Debris can pile up after a storm, bringing potential damage with it.

If you own your own home or have permission from your landlord, replace your single pane windows with double paned versions. Good double pane windows keep cool air in during the summer and minimize your utility expenses. Conversely, they keep warm air in during the winter.

A programmable thermostat is a simple way to help save money on air conditioning costs. It changes the temperature so the system isn’t in use when it’s cooler outside or no one is home. Additionally, some programmable thermostats can be controlled remotely using a web-connected device.

Save energy use and money by turning off the air conditioner if there is nobody home. With the system off, the house will only heat up to a certain temperature. Leaving the system on all day will cost a lot of money in terms of electricity.

TIP! Make sure that you do not cover your outdoor components with grass clippings when you are trimming the grass. Aim the grass in a different direction from the unit.

Your home should not have temperatures that are too hot. It takes quite a while to cool a home by more than 20 degrees. If the temperature in your home rises to 100 degrees F or higher, cooling it will only drop the temperature to 80 degrees F. If humidity is high, this temp is still unsafe for people.

There are many things to help when you want information on HVAC units. It is important that installation and maintenance is done properly. Use these tips to make sure you get the most from your HVAC unit.

Please visit my home page at: RaleighAirDuctCleaning.com

Tagged with:

Filed under: HVAC

Like this post? Subscribe to my RSS feed and get loads more!