If you’re unfamiliar with HVAC and you need to learn about it, this article is fa great place to start. This article will lead you along the way so you can become a master at this. By reading carefully, you can learn a lot.
Clean your condenser’s fan blades and coils come spring. Before you clean the unit, be sure to turn off the power. Remove leaves and debris from the outdoor unit.
Clean your outdoor condensers often. After a wind or rain storm things may pile up, causing problems with your HVAC system. It can get overheated, which will cause problems with the whole system.
Every spring you should clean the coils and fan blades on your condenser fan. First, the power should be turned off so things don’t move as you work. Next, pop the grill off, put the blades out and start to gently clean them along with the unit.
As you notice the tress begin to lose their leaves, keep an eye on your outdoor condenser unit. Cleaning your unit is very important for its effectiveness. The fan needs unobstructed air flow, and if debris is blocking this air flow, then your system could suffer.
Lubricate your condenser yearly if it has oil ports. You will see rubber or metal caps covering the ports. Pick a type of SAE 20 oil that is non-detergent and lightweight. Place 10 or less drops into every port to avoid overfilling.
A shady spot is always a good choice for the placement of your outdoor compressor. The unit will operate more efficiently to cool your home if the intake air is cooler to begin with.
It’s not too tough to get into HVAC once you have information like what you read in this article. Using the above information, you should be able to continue your HVAC education without risking breaking parts or making costly mistakes. Best wishes as you begin your journey.
Please visit my home page at: RaleighAirDuctCleaning.com
Tagged with: fan blades
Filed under: HVAC
Like this post? Subscribe to my RSS feed and get loads more!