Learning about HVAC may seem daunting, but if you have the right information, it doesn’t have to be a difficult task. This article will help you if you like this type of thing. Just continue reading and by the time you’re through, you’ll know something about HVAC systems that you didn’t know when you began!

Before you start calling to find someone to fix your unit, make sure you know the type of system that is installed. Take a look at the system or the owner’s manual to find the name and model number. Your contractor will appreciate this information.

Don’t hire a contractor until you know a little about what you are facing. A contractor will not be able to give you an accurate price without accurate information about your system. If you are unable to explain the work that needs to be taken care of, the conversation will be even less fruitful. So, you should know this beforehand.

TIP! Think about what improvements you want made before picking an HVAC contractor. Providing you with an accurate estimate over the telephone may be difficult to impossible is they can’t see the system you have.

Outside Condenser

Keeping the outside condenser clean of debris and leaves will improve the system’s efficiency. Turn off the power if you are going to work on your HVAC system. In addition, always remove all debris such as leaves from the outside condenser unit.

Clean the debris on your condenser units. You can never tell when things will pile up, especially following rain or wind storms. These can wreak havoc on your units. This can lead to overheating.

TIP! If your unit is outdoors, clean them regularly. Wind can pile up all sorts of debris against its grill.

Be sure to clean the fan blades and coils of the condenser fan. First, the power should be turned off so things don’t move as you work. Then take off the grill, take the blades out, and gently clean them.

Your HVAC system could suffer when trees begin dropping their leaves. Clean outdoor units often to remove leaves. You can head off future problems that can be caused by blockages by making sure there is a free flow of air to your fan.

Some fan condensers may contain oil parts, and if yours does, ensure it is lubricated at least once per year. These ports have a metal covering. Sometimes it is rubber. Put 10 drops of lightweight, non-detergent SAE oil in each port. Be careful not to use too much.

TIP! If the fan condenser on your unit has ports for oil, make sure you lubricate it once a year. You’ll see that the ports here are closed with a rubber or metal cap.

A shady spot is always a good choice for the placement of your outdoor compressor. The unit will operate more efficiently to cool your home if the intake air is cooler to begin with.

Outdoor condenser units need to be turned off when the weather turns cold. When the temperature drops beneath 60 degrees, it’s time to cut off the unit to prevent damage. This helps the system last much longer and will have to be repaired less often.

To keep your system running smoothly have your system serviced once a year. During the visit, the contractor will oil parts, inspect the motor and the freon levels. Those things are going to help your system at peak performance.

TIP! It’s a good idea to put your outdoor compressor in a shady area. When your unit is bringing in cool air, it will not have to work as hard to cool the air as it moves it inside, boosting efficiency.

Never allow your home to get dangerously hot inside. Air conditioners can only really cool your home down 20 degrees or so within a reasonable time period. If your home become 100F or more, it will only cool off to about 80F. Depending on what the humidity is, this may not be cool enough to be a safe temperature to sleep at when recovering from the harsh summer heat.

Anyone can install and properly use an HVAC system. It is vital though to learn everything about it. Use the above tips for help.

Please visit my home page at: RaleighAirDuctCleaning.com

Tagged with: • •

Filed under: HVAC

Like this post? Subscribe to my RSS feed and get loads more!