Most homeowners want their home to have a great HVAC system. HVAC units can keep homes at comfy temperatures. Since the HVAC unit has machinery, the installation and maintenance will often require professional contractors or technicians. This article has some great suggestions to help you along the way.
If you have some problems with the HVAC system, check out your home before calling a contractor. Determine which rooms feel cold and which feel hot. This can help contractors quickly figure out the issue and how to fix it easily and quickly.
By the end of spring, the fan blades and coils of your condenser should be thoroughly cleaned, so operation can proceed with greater efficiency. If you are doing more than a light surface cleaning, make sure that the power is shut off to the HVAC unit. Clean the outdoor condenser as well.
Clean the debris from outside units often. You don’t know when things are going to pile up, like right after it’s windy or rains, and that can ruin your system. The whole thing can overheat, causing major problems and possibly an enormous expense for you.
When you cut the grass, make sure your mower isn’t tossing clippings toward your outdoor units. Now so the grass clippings are shot away from your unit. This also applies when you blow leaves, so be very careful near your exterior HVAC units when you move debris.
Lubricate the oil ports on your condenser once each year. These ports have a metal covering. Sometimes it is rubber. Put about ten drops or less of a good non-detergent SAE 20 oil into each port.
These are just some of the things you need to remember about your unit and whom you hire to maintain it. Ensure that the unit is installed correctly, and don’t forget to maintain it. Use these tips to make sure you get the most from your HVAC unit.
Please visit my home page at: RaleighAirDuctCleaning.com
Filed under: HVAC
Like this post? Subscribe to my RSS feed and get loads more!